Articles
Newsletters
| How to Construct a Stun Gun |
 |
 |
 |
| Written by Dexter Johnson |
| Thursday, 26 January 2012 10:24 |
|
Stun guns and tasers are non-lethal electrical apparatus utilized as a self-defense weapon developed to halt or incapacitate an attacker by dispensing a high voltage zap of electric power to his/her body. The shock causes the attacker's muscle tissue to stop and he/she will fall and end up incapacitated for a several moments. This gives the stun gun user time to escape from the attacker. Stun Guns are can be obtained in the U. S. if you are more than the age of eighteen and can be transported in the majority of states legally, except for Illinois, Hawaii, Massachusetts, Michigan, New Jersey, New York, Rhode Island and several metropolitan areas which include Annapolis, MD, Baltimore, MD, District of Columbia and Philadelphia. It's very dangerous to trust your wellbeing to a selfmade apparatus, consequently it's not advised to assemble your own stun gun. Nevertheless, the following are guidelines to assemble a stun gun using a throw away camera that will produce less than 1/4 of the voltage of a professionally made stun gun. Procedures to construct a stun gun: 1. Utilizing a screw driver open up the back of a throw-away camera. 2. Remove the battery pack from the camera. 3. Identify the miniature light bulb that is utilized as the camera's flash. 4. Remove the camera flash to the full extension so that the wires connecting it will allow. If the wires are soldered in position cut them with the wire shears. If the wires are wrapped around contact points, then un-wrap them cautiously. 5. Cut two 3-4 inches equal lengths of copper wire. 6. Wrap each wire to the wires that was connected to the flash bulb. 7. Apply some soldering wire to the joints and melt it into place with the soldering iron. This will create longer wires protruding from the camera. These wires should never touch, but should be within a few inches of each other at all times. Thicker and stiffer sheathed copper wiring will make it easier to accomplish this. Place this aside for the moment. 8. Then, cut the plastic cover of a five star binder free using scissors keeping it in a single piece if possible. 9. Place the thick plastic coating on the camera in order to sheath the exposed circuitry and cut holes for the flash and shutter buttons on the camera, then place the batteries back in place. 10. Glue the covers in place. The unit will now look like a thick appointment planner with two stiff wires sticking out of the top. 11. Pressing the shutter button will cause sparks, which can be used as a stun gun. As explained above, constructing your own stun gun is not advised simply because you can very easily hurt yourself and it may not be dependable. Purchasing a stun gun is advisable because they are reasonably priced, constructed properly, and will not hurt you if utilized properly. About the Author: Written by Dexter Johnson. You can find out more information about stun guns and the Taser m26c at Stunster.com. Kindly provided by MoneyHunter.org You are welcome to use this article on your own website, if you include the link just before this text. |
Members : 2332
Content : 2517
Web Links : 1
Content View Hits : 214612
Content : 2517
Web Links : 1
Content View Hits : 214612